ASTM 52921
TensileTerminology for AM coordinate systems and build-orientation designation of test coupons.
Tensile
Tensile Testing Machine
A specimen is gripped at both ends and pulled at a controlled rate until it yields or breaks, giving tensile strength, yield, elongation and modulus.
Runs onSeries 7200
ASTM A228 / A229 / A401
TensileMusic wire, oil-tempered and Cr-Si spring wire — tensile verification of spring wire.
ASTM A370
TensileComprehensive mechanical testing (tension, bend, hardness) of steel products including rebar, plate, tube, fasteners.
ASTM A416-adjacent
TensileEquivalent to: IS 14268
ASTM A931
TensileTension testing of wire ropes and strand (breaking force determination).
ASTM A931 / control cable specs
TensileBreaking strength of aircraft control cables, wire rope and swaged terminals.
ASTM B230 / B609
TensileAluminium and copper conductor wire — tensile verification.
ASTM B557 / B557M
TensileTension testing of wrought and cast aluminium- and magnesium-alloy products.
ASTM C297
TensileFlatwise tensile strength of sandwich constructions (core-to-facing bond).
ASTM C496
TensileSplitting tensile strength of cylindrical concrete specimens.
ASTM D1414
TensileTesting of rubber O-rings (tensile strength, elongation using spool fixtures).
ASTM D143
TensileSmall clear specimens of timber — static bending, compression parallel/perpendicular, shear, tension.
ASTM D1623
TensileTensile and tensile-adhesion properties of rigid cellular plastics.
ASTM D1683
TensileSewn seam strength and maximum force to seam rupture of woven fabrics.
ASTM D1708
TensileMicrotensile properties of plastics using miniature specimens (limited material availability).
ASTM D1822
TensileTensile-impact energy to break plastics and electrical insulating materials.
ASTM D2061
TensileStrength tests for zippers — crosswise strength, slider lock holding, pull-off of puller.
ASTM D2105
TensileLongitudinal tensile properties of fibreglass (GRP/FRP) pipe and tube.
ASTM D2256
TensileTensile properties of single yarns (breaking force, elongation, tenacity).
ASTM D2290
TensileApparent hoop tensile strength of plastic or reinforced pipe by split-disk method.
ASTM D2632-adjacent note
TensileResilience, flexometer and DeMattia flex tests require dedicated instruments and are companions to UTM testing.
ASTM D2861 / wire bond pull
TensileFine wire and bond pull strength (micro-force testing; special low-capacity load cells).
ASTM D3039
TensileTensile properties of polymer matrix composite materials (straight-sided tabbed coupons).
ASTM D3574
TensileFlexible cellular materials — slab, bonded and molded urethane foams (IFD, CFD, tensile, tear, compression set).
ASTM D378
TensileStandard test methods for rubber (elastomeric) conveyor and transmission belting — tension testing.
ASTM D412
TensileTension testing of vulcanized rubber and thermoplastic elastomers (dumbbell and ring specimens).
ASTM D4595
TensileWide-width strip tensile testing of geotextiles and geosynthetics.
ASTM D4595 / D4632
TensileGeotextiles and geogrids for roads, embankments and landfills.
ASTM D4632
TensileGrab breaking load and elongation of geotextiles.
ASTM D4885
TensilePerformance strength of geomembranes by wide-width strip tensile method.
ASTM D5034
TensileBreaking force and elongation of textile fabrics — Grab test.
ASTM D5034 / D5035
TensileWoven fabric grab and strip tensile for apparel and home textiles.
ASTM D5035
TensileBreaking force and elongation of textile fabrics — Strip method.
ASTM D5083
TensileTensile properties of reinforced thermosetting plastics using straight-sided specimens.
ASTM D5766
TensileOpen-hole tensile strength of polymer matrix composite laminates.
ASTM D5961
TensileBearing response of polymer matrix composite laminates (bolted-joint design data).
ASTM D6319 / D3578
TensileNitrile and rubber examination gloves — tensile strength and elongation requirements tested per ASTM D412.
ASTM D638
TensileTensile properties of unreinforced and reinforced rigid plastics (dog-bone specimens).
ASTM D6637
TensileTensile properties of geogrids by single- or multi-rib method.
ASTM D6693
TensileTensile properties of nonreinforced polyethylene and flexible polypropylene geomembranes.
ASTM D6775
TensileBreaking strength and elongation of textile webbing, tape and braided material.
ASTM D7205
TensileTensile properties of FRP matrix composite bars (FRP rebar).
ASTM D751
TensileCoated fabrics — breaking strength, tear, adhesion of coating, puncture.
ASTM D828
TensileTensile properties of paper and paperboard using CRE apparatus.
ASTM D882
TensileTensile properties of thin plastic sheeting and films (<1 mm thick).
ASTM D885
TensileTyre cords, tyre cord fabrics and industrial yarns made from manufactured fibres — tensile and adhesion methods.
ASTM D897 / D2095
TensileTensile (butt-joint) strength of adhesive bonds — bar and rod specimens.
ASTM D953
TensileBearing strength of plastics (pin bearing, tension or compression loading).
ASTM E21
TensileElevated-temperature tension tests of metallic materials.
ASTM E238
TensilePin-type bearing test of metallic materials (bearing strength for riveted/bolted design).
ASTM E345
TensileTension testing of metallic foil.
ASTM E517
TensilePlastic strain ratio (r-value) of sheet metal (deep-drawing quality).
ASTM E646
TensileTensile strain-hardening exponent (n-value) of metallic sheet materials (formability).
ASTM E646 / E517
TensileSheet metal formability — n-value and r-value for stamping and deep drawing.
ASTM E8
TensileBody, chassis and powertrain steel and aluminium tensile verification.
ASTM E8 / A370
TensileLine pipe and casing — tensile qualification of pipe body and weld.
ASTM E8 / E8M
TensileFundamental tension testing of metallic materials (bars, tubes, sheets, castings).
ASTM F1614
TensileShock-attenuation of athletic footwear midsoles.
ASTM F2150
TensileCharacterization of biomaterial polymer hydrogels.
ASTM F2346
TensileStatic and dynamic characterization of spinal artificial discs.
ASTM F2458
TensileWound closure strength of tissue adhesives and sealants.
ASTM F2516
TensileTension testing of Nickel-Titanium (Nitinol) superelastic materials (upper/lower plateau strength).
ASTM F3122
TensileGuide for evaluating mechanical properties of metal AM materials — maps conventional test methods to AM parts.
ASTM F606
TensileThreaded fastener proof-load and wedge-tensile verification.
ASTM D2061 / PS 79-adjacent
TensileGarment and product closure strength (childrenswear snap pull-off).
Airbus AITM 1-0007 / Boeing BSS 7320
TensileOEM-specific composite coupon test methods run on calibrated UTMs per customer approval.
BS 5131
TensileHeel attachment strength of women's footwear.
EN 10270-1 / -2 / -3
TensilePatented cold-drawn, oil-tempered and stainless spring steel wire — tensile grade verification.
EN 10270-adjacent
TensileEquivalent to: IS 4454
EN 12520
TensileDomestic seating and storage furniture — static load requirements.
EN 14350
TensileSoothers and drinking equipment — tensile integrity of components (choking-hazard prevention).
EN 14988
TensileChildren's high chairs — static load and restraint-system strength.
EN 16121-adjacent
TensileDomestic seating and storage furniture — static load requirements.
EN 16139
TensileDomestic and non-domestic seating — strength and durability static load tests.
EN 1728
TensileDomestic and non-domestic seating — strength and durability static load tests.
EN 1888-1 / -2
TensileWheeled child conveyances (strollers/prams) — static strength of handles, harness anchorage and locking devices.
EN 1957
TensileBeds and mattresses — durability rig companion; firmness characterization via ISO 2439-type indentation on UTM.
EN 28094
TensileSteel cord conveyor belts — adhesion strength of splice joints.
EN 310 / 314-adjacent
TensileEquivalent to: IS 1734
EN 319
TensileParticleboards and fibreboards — internal bond (tensile strength perpendicular to plane).
EN 354
TensileFall-arrest lanyards, harnesses and anchors — static strength verification.
EN 361
TensileFall-arrest lanyards, harnesses and anchors — static strength verification.
EN 455-2
TensileMedical gloves — force at break requirements (single-use gloves).
EN 747-1 / -2
TensileBunk beds and high beds — static strength of frame, guard rails and ladder.
EN 795
TensileFall-arrest lanyards, harnesses and anchors — static strength verification.
EN 868
TensilePackaging for terminally sterilized medical devices — seal strength verification (references F88-type peel).
EN 74 / ETAG 001-adjacent
TensileSlip, tensile and pull-out testing of scaffolding couplers and construction anchors.
IEC 60352-2 / USCAR-21
TensileCrimped connections — pull-out (crimp tensile) force testing of terminals.
IEC 60811-501
TensileInsulating and sheathing materials of electric cables — tensile strength and elongation at break. Equivalent to: IS 10810-7
IEC 60811-501 / USCAR-21
TensileWiring harness insulation tensile and crimp pull-off testing (EV high-voltage harnesses).
IEC 60383-adjacent
TensileMechanical failing load of insulators (large-capacity tensile frames).
IRS T-12
TensileFlat-bottom rails — tensile testing of rail steel samples for chemistry-property certification.
IS 10810
TensileIndian Standard — tensile strength and elongation of cable insulation and sheath.
IS 10810-7
TensileCable insulation and sheath — tensile and elongation. Equivalent to: IEC 60811-501
IS 1367-3
TensileMechanical properties of threaded steel fasteners. Equivalent to: ISO 898-1
IS 15298 series
TensileSafety footwear — mechanical test methods and specification. Equivalent to: ISO 20344 / 20345
IS 1608
TensileIndian Standard for tensile testing of metallic materials at room temperature (aligned to ISO 6892-1).
IS 1608-1
TensileTensile testing of metallic materials at room temperature. Equivalent to: ISO 6892-1
IS 16709-adjacent
TensilePP/HDPE woven sack fabric and seam strength (cement, fertilizer, food-grain packaging).
IS 1734
TensileIndian Standard methods of test for plywood — static bending, glue shear strength. Equivalent to: EN 310 / 314-adjacent
IS 1835
TensileSteel wire for ropes and steel wire ropes for general engineering — breaking load verification. Equivalent to: ISO 2408 / 1835-adjacent
IS 1891
TensileIndian Standard — general-purpose rubber conveyor belts; tensile, elongation and adhesion requirements.
IS 1969
TensileIndian Standard — breaking strength and elongation of woven fabrics (strip and grab).
IS 1969-1 / -2
TensileFabric breaking strength — strip and grab methods. Equivalent to: ISO 13934-1 / -2
IS 2266
TensileSteel wire for ropes and steel wire ropes for general engineering — breaking load verification. Equivalent to: ISO 2408 / 1835-adjacent
IS 3400
TensileIndian Standard methods of test for vulcanized rubber — tensile stress-strain properties.
IS 3400-1
TensileCompound QC — tensile stress-strain of every production batch. Equivalent to: ISO 37
IS 4454
TensileSteel wire for cold-formed springs — wire tensile strength verification. Equivalent to: EN 10270-adjacent
IS 5914-adjacent
TensileIndian Standard methods of physical testing of leather — tensile, tear, grain crack.
IS 9998-adjacent
TensileChildren's high chairs — static load and restraint-system strength.
ISO 10113 / 10275
Tensiler-value and n-value determination for sheet and strip (formability parameters).
ISO 10319
TensileWide-width strip tensile testing of geotextiles and geosynthetics.
ISO 10365
TensileDesignation of main adhesive bond failure patterns — reporting companion to all bond tests.
ISO 1120
TensileConveyor belts — determination of strength of mechanical fastenings (static test).
ISO 11607-1
TensilePackaging for terminally sterilized medical devices — seal strength verification (references F88-type peel).
ISO 12625-4 / -5
TensileTissue paper and tissue products — tensile strength, stretch and wet tensile strength.
ISO 13934
TensileWoven fabric grab and strip tensile for apparel and home textiles.
ISO 13934-1 / -2
TensileTensile properties of fabrics — strip method and grab method. Equivalent to: IS 1969-1 / -2
ISO 13935
TensileSeam strength and seam slippage of garments and upholstery.
ISO 13935-1 / -2
TensileSewn seam strength and maximum force to seam rupture of woven fabrics.
ISO 13953
TensilePE butt-fusion pipe joints — tensile strength and failure mode of test specimens.
ISO 1421
TensileRubber- or plastics-coated fabrics (belt carcass materials) — tensile strength and elongation.
ISO 14272
TensileCross-tension testing of resistance spot welds.
ISO 15579
TensileTensile testing of metallic materials at low temperature (sub-ambient chambers).
ISO 17706
TensileFootwear uppers — tensile strength and elongation.
ISO 1798
TensileTensile strength and elongation at break of flexible cellular polymers.
ISO 1806
TensileFishing nets — determination of mesh breaking force of netting.
ISO 1835
TensileHoisting tackle breaking-load verification (large-capacity frames).
ISO 1924-2
TensileTensile strength of paper, tissue and board.
ISO 1924-2 / -3
TensilePaper and board — tensile properties (constant rate of elongation, 20 and 100 mm/min).
ISO 20344 / 20345
TensileEquivalent to: IS 15298 series
ISO 2062
TensileTensile properties of single yarns (breaking force, elongation, tenacity).
ISO 21181
TensileLight conveyor belts — determination of relaxed elastic modulus.
ISO 22650
TensileHeel attachment strength of women's footwear.
ISO 2307
TensileFibre ropes — determination of linear density, breaking force and elongation.
ISO 2408
TensileSteel wire ropes — minimum breaking force requirements and verification testing.
ISO 2408 / 1835-adjacent
TensileEquivalent to: IS 2266, IS 1835
ISO 283
TensileTextile conveyor belts — full-thickness tensile strength, elongation at break and elongation at reference load.
ISO 283 / 252
TensileEquivalent to: IS 1891-1
ISO 3376
TensileLeather — tensile strength and percentage elongation.
ISO 340 (flame) — companion
TensileNote: safety/flammability tests are companion tests outside the UTM scope.
ISO 37
TensileDetermination of tensile stress-strain properties of vulcanized and thermoplastic rubber. Equivalent to: IS 3400-1
ISO 3776 / ECE R16
TensileSeat-belt webbing breaking strength and elongation (tested as narrow fabric tensile).
ISO 4136
TensileTransverse tensile test of butt-welded joints in metallic materials.
ISO 527
TensileMoulded part and compound qualification — tensile.
ISO 527 / 178 / 604
TensileEquivalent to: IS 13360 series
ISO 527-1 / -2
TensileGeneral principles and test conditions for tensile properties of moulding and extrusion plastics.
ISO 527-3
TensileTensile properties of plastic films and sheets.
ISO 527-4 / -5
TensileTensile properties of isotropic/orthotropic and unidirectional fibre-reinforced plastic composites.
ISO 527-5
TensileWind turbine blade laminate coupon qualification.
ISO 5287
TensileNarrow V-belts for automotive industry — fatigue and static tension verification.
ISO 6259
TensilePE / PVC / PPR pressure pipe tensile and hoop strength.
ISO 6259-1 / -3
TensileTensile properties of thermoplastics pipes (PE, PP, PVC pipe specimens).
ISO 6892-1
TensileTensile testing of metallic materials at ambient temperature (Methods A and B strain-rate control). Equivalent to: IS 1608-1
ISO 6892-2
TensileTensile testing of metallic materials at elevated temperature.
ISO 703
TensileTroughability of conveyor belts — flexibility companion test performed on a dedicated rig.
ISO 7622-1 / -2
TensileSteel cord conveyor belts — longitudinal traction: elongation measurement and tensile strength of cords.
ISO 8094
TensileSteel cord conveyor belts — adhesion strength of splice joints.
ISO 8256
TensileDetermination of tensile-impact strength of plastics.
ISO 8339
TensileBuilding sealants — tensile properties at maintained extension.
ISO 898-1
TensileThreaded fastener proof-load and wedge-tensile verification. Equivalent to: IS 1367-3
ISO 9073-18
TensileNonwovens — breaking strength and elongation by grab method.
ISO 9856
TensileConveyor belts — determination of elastic and permanent elongation and calculation of elastic modulus (cyclic loading).
TAPPI T494
TensileTensile properties of paper and paperboard using CRE apparatus.
Showing 1–8 of 164 standards
Next
Tell us the specimen, not just the standard.
Thickness, width and expected break force decide the grip as much as the method does. Send us those and we will specify the frame, the load cell and the fixture around them.