API 1104
Flexure & bendStructural and pipeline welding codes — mechanical acceptance testing of weld coupons.
Metals, alloys & welds
Metal Tensile Testing Machine
Filter by test type, industry or standards body, or search a designation directly. Where a method has an equivalent under another body, both are shown.
ASME BPVC Section IX
Flexure & bendWelder and weld procedure qualification — transverse tension and guided bend tests for pressure vessels and piping.
ASTM A370
TensileComprehensive mechanical testing (tension, bend, hardness) of steel products including rebar, plate, tube, fasteners.
ASTM A615 / A706
Flexure & bendDeformed and plain carbon-steel / low-alloy steel rebar — mechanical property verification.
ASTM A931
TensileTension testing of wire ropes and strand (breaking force determination).
ASTM B557 / B557M
TensileTension testing of wrought and cast aluminium- and magnesium-alloy products.
ASTM E139
Creep & relaxationCreep, creep-rupture and stress-rupture tests of metallic materials.
ASTM E190
Flexure & bendGuided bend test for ductility of welds.
ASTM E21
TensileElevated-temperature tension tests of metallic materials.
ASTM E238
TensilePin-type bearing test of metallic materials (bearing strength for riveted/bolted design).
ASTM E290
Flexure & bendBend testing of materials for ductility (guided, semi-guided and free bend).
ASTM E345
TensileTension testing of metallic foil.
ASTM E466
FatigueForce-controlled constant-amplitude axial fatigue tests of metallic materials (servo-hydraulic UTM).
ASTM E517
TensilePlastic strain ratio (r-value) of sheet metal (deep-drawing quality).
ASTM E646
TensileTensile strain-hardening exponent (n-value) of metallic sheet materials (formability).
ASTM E8 / E8M
TensileFundamental tension testing of metallic materials (bars, tubes, sheets, castings).
ASTM E9
CompressionCompression testing of metallic materials at room temperature.
ASTM F2516
TensileTension testing of Nickel-Titanium (Nitinol) superelastic materials (upper/lower plateau strength).
ASTM F606 / F606M
Load–deflection & proof loadMechanical properties of externally and internally threaded fasteners, washers and rivets (wedge tensile, proof load, axial tension).
AWS D1.1
Flexure & bendStructural and pipeline welding codes — mechanical acceptance testing of weld coupons.
IS 1367
Load–deflection & proof loadIndian Standard for mechanical properties of threaded steel fasteners.
IS 1599
Flexure & bendIndian Standard bend test for metallic materials. Equivalent to: ISO 7438
IS 1608
TensileIndian Standard for tensile testing of metallic materials at room temperature (aligned to ISO 6892-1).
IS 1786
Flexure & bendHigh-strength deformed steel bars (rebar) for concrete reinforcement — 0.2% proof stress, elongation, bend and rebend tests. Equivalent to: —
IS 1835
TensileSteel wire for ropes and steel wire ropes for general engineering — breaking load verification. Equivalent to: ISO 2408 / 1835-adjacent
IS 2266
TensileSteel wire for ropes and steel wire ropes for general engineering — breaking load verification. Equivalent to: ISO 2408 / 1835-adjacent
ISO 10113 / 10275
Tensiler-value and n-value determination for sheet and strip (formability parameters).
ISO 14270
Peel & adhesionMechanized peel testing of resistance spot, seam and embossed projection welds.
ISO 14273
ShearTensile-shear testing of resistance spot, seam and embossed projection welds.
ISO 15579
TensileTensile testing of metallic materials at low temperature (sub-ambient chambers).
ISO 15630-1
Flexure & bendTest methods for reinforcing steel bars, rods and wire.
ISO 204
Creep & relaxationUninterrupted uniaxial creep testing of metallic materials in tension.
ISO 2408
TensileSteel wire ropes — minimum breaking force requirements and verification testing.
ISO 4136
TensileTransverse tensile test of butt-welded joints in metallic materials.
ISO 5173
Flexure & bendBend tests on welds in metallic materials (root, face and side bend).
ISO 6892-1
TensileTensile testing of metallic materials at ambient temperature (Methods A and B strain-rate control). Equivalent to: IS 1608-1
ISO 6892-2
TensileTensile testing of metallic materials at elevated temperature.
ISO 7438
Flexure & bendBend test of metallic materials. Equivalent to: IS 1599
ISO 8492 / 8493 / 8495
CompressionFlattening, drift-expanding and ring-expanding tests on metallic tubes.
ISO 898-1 / -2
Load–deflection & proof loadMechanical properties of carbon and alloy steel bolts, screws, studs and nuts (proof load and wedge tensile testing).
Showing 1–8 of 40 standards
Next
Tell us the specimen, not just the standard.
Thickness, width and expected break force decide the grip as much as the method does. Send us those and we will specify the frame, the load cell and the fixture around them.