ASTM D378
TensileStandard test methods for rubber (elastomeric) conveyor and transmission belting — tension testing.
Conveyor & transmission belts
Conveyor Belt Testing Machine
Filter by test type, industry or standards body, or search a designation directly. Where a method has an equivalent under another body, both are shown.
Runs onSeries 7200
DIN 22102
Load–deflection & proof loadTextile carcass conveyor belts for bulk materials — grades and mechanical acceptance values (tested per ISO 283 / ISO 252).
DIN 22131
Load–deflection & proof loadSteel cord conveyor belts — dimensions and requirements.
EN 28094
TensileSteel cord conveyor belts — adhesion strength of splice joints.
EN ISO 14890
Load–deflection & proof loadRubber/plastics covered conveyor belts of textile construction for general use — acceptance requirements.
IS 1891
TensileIndian Standard — general-purpose rubber conveyor belts; tensile, elongation and adhesion requirements.
ISO 1120
TensileConveyor belts — determination of strength of mechanical fastenings (static test).
ISO 1421
TensileRubber- or plastics-coated fabrics (belt carcass materials) — tensile strength and elongation.
ISO 15236-1
Load–deflection & proof loadSteel cord conveyor belts — design, dimensions and mechanical requirements for general-purpose belts.
ISO 21181
TensileLight conveyor belts — determination of relaxed elastic modulus.
ISO 252
Peel & adhesionConveyor belts — adhesion between constitutive elements (ply-to-ply and cover-to-ply, tested as peel on UTM).
ISO 283
TensileTextile conveyor belts — full-thickness tensile strength, elongation at break and elongation at reference load.
ISO 505
TearConveyor belts — method for determination of tear propagation resistance of textile belts.
ISO 5287
TensileNarrow V-belts for automotive industry — fatigue and static tension verification.
ISO 703
TensileTroughability of conveyor belts — flexibility companion test performed on a dedicated rig.
ISO 7622-1 / -2
TensileSteel cord conveyor belts — longitudinal traction: elongation measurement and tensile strength of cords.
ISO 7623
Peel & adhesionSteel cord conveyor belts — cord-to-coating adhesion test (initial and after thermal treatment).
ISO 8094
TensileSteel cord conveyor belts — adhesion strength of splice joints.
ISO 9856
TensileConveyor belts — determination of elastic and permanent elongation and calculation of elastic modulus (cyclic loading).
Showing 1–8 of 19 standards
Next
Tell us the specimen, not just the standard.
Thickness, width and expected break force decide the grip as much as the method does. Send us those and we will specify the frame, the load cell and the fixture around them.