AS/NZS 2111.16
Peel & adhesionTextile floor coverings — bond strength determination (delamination of backing).
Textiles, fibres, ropes & geosynthetics
Textile Testing Machine
Filter by test type, industry or standards body, or search a designation directly. Where a method has an equivalent under another body, both are shown.
Runs onSeries 7200
ASTM D1335
Peel & adhesionTuft bind of pile yarn floor coverings (force to pull a tuft from carpet backing).
ASTM D1683
TensileSewn seam strength and maximum force to seam rupture of woven fabrics.
ASTM D2061
TensileStrength tests for zippers — crosswise strength, slider lock holding, pull-off of puller.
ASTM D2256
TensileTensile properties of single yarns (breaking force, elongation, tenacity).
ASTM D2261
TearTearing strength of fabrics by the tongue (single rip) procedure (CRE machine).
ASTM D3787 / D6797
Puncture & burstBursting strength by ball-burst attachment on CRT/CRE tensile machines.
ASTM D4533
TearTrapezoid tearing strength of geotextiles.
ASTM D4595
TensileWide-width strip tensile testing of geotextiles and geosynthetics.
ASTM D4632
TensileGrab breaking load and elongation of geotextiles.
ASTM D5034
TensileBreaking force and elongation of textile fabrics — Grab test.
ASTM D5035
TensileBreaking force and elongation of textile fabrics — Strip method.
ASTM D5169 / D5170
Peel & adhesionHook-and-loop touch fasteners — shear strength and 180° peel strength.
ASTM D6241
Puncture & burstStatic puncture strength of geotextiles using 50 mm probe (CBR puncture).
ASTM D6637
TensileTensile properties of geogrids by single- or multi-rib method.
ASTM D6775
TensileBreaking strength and elongation of textile webbing, tape and braided material.
ASTM D751
TensileCoated fabrics — breaking strength, tear, adhesion of coating, puncture.
IS 1969
TensileIndian Standard — breaking strength and elongation of woven fabrics (strip and grab).
ISO 10319
TensileWide-width strip tensile testing of geotextiles and geosynthetics.
ISO 12236
Puncture & burstGeosynthetics — static puncture test (CBR test, 50 mm plunger).
ISO 13934-1 / -2
TensileTensile properties of fabrics — strip method and grab method. Equivalent to: IS 1969-1 / -2
ISO 13935-1 / -2
TensileSewn seam strength and maximum force to seam rupture of woven fabrics.
ISO 13937-2 / -3 / -4
TearTear properties of fabrics — trouser, wing and tongue-shaped specimens.
ISO 13938-1
Puncture & burstHydraulic/pneumatic diaphragm bursting (reference; ball-burst on UTM used as alternative).
ISO 1806
TensileFishing nets — determination of mesh breaking force of netting.
ISO 2062
TensileTensile properties of single yarns (breaking force, elongation, tenacity).
ISO 2307
TensileFibre ropes — determination of linear density, breaking force and elongation.
ISO 4674-1
TearTear resistance of rubber- or plastics-coated fabrics.
ISO 9073-18
TensileNonwovens — breaking strength and elongation by grab method.
ISO 9073-3 / -4
TearNonwovens — strip tensile and trapezoid tear (hygiene, medical, filtration, wipes).
Showing 1–8 of 30 standards
Next
Tell us the specimen, not just the standard.
Thickness, width and expected break force decide the grip as much as the method does. Send us those and we will specify the frame, the load cell and the fixture around them.