ASTM C297
TensileFlatwise tensile strength of sandwich constructions (core-to-facing bond).
Composites & sandwich structures
Composite Testing Machine
Filter by test type, industry or standards body, or search a designation directly. Where a method has an equivalent under another body, both are shown.
Runs onSeries 7200
ASTM C364
CompressionEdgewise compressive strength of sandwich constructions.
ASTM C365
CompressionFlatwise compressive properties of sandwich cores.
ASTM C393 / D7249
Flexure & bendCore shear and facing properties of sandwich constructions by beam flexure.
ASTM D2290
TensileApparent hoop tensile strength of plastic or reinforced pipe by split-disk method.
ASTM D2344
ShearShort-beam strength — interlaminar shear strength of composite laminates.
ASTM D3039
TensileTensile properties of polymer matrix composite materials (straight-sided tabbed coupons).
ASTM D3410
CompressionCompressive properties of composites by shear loading (IITRI fixture).
ASTM D3518
ShearIn-plane shear response by tensile test of a ±45° laminate.
ASTM D4255
ShearIn-plane shear properties by rail shear method.
ASTM D5379
ShearShear properties by V-notched beam (Iosipescu) method.
ASTM D5528
Fracture toughnessMode I interlaminar fracture toughness (GIc) — double cantilever beam (DCB).
ASTM D5766
TensileOpen-hole tensile strength of polymer matrix composite laminates.
ASTM D5961
TensileBearing response of polymer matrix composite laminates (bolted-joint design data).
ASTM D6415
Fracture toughnessCurved-beam strength — interlaminar tensile strength of curved composite laminates.
ASTM D6484
CompressionOpen-hole compressive strength of composite laminates.
ASTM D6641
CompressionCompressive properties of polymer matrix composites — Combined Loading Compression (CLC) fixture.
ASTM D6671
Fracture toughnessMixed-Mode I/II interlaminar fracture toughness — MMB fixture.
ASTM D7078
ShearShear properties by V-notched rail shear method.
ASTM D7137
CompressionCompressive residual strength of damaged composite plates — Compression After Impact.
ASTM D7205
TensileTensile properties of FRP matrix composite bars (FRP rebar).
ASTM D790 / D7264
Flexure & bendFlexural properties of composites — 3-point and 4-point bending.
ASTM D7905
Fracture toughnessMode II interlaminar fracture toughness (GIIc) — end-notched flexure (ENF).
EN 2561 / 2562 / 2563
ShearEuropean aerospace series — CFRP parallel-fibre tensile, flexural and interlaminar shear.
ISO 14125
Flexure & bendFlexural properties of fibre-reinforced plastic composites.
ISO 14126
CompressionIn-plane compressive properties of fibre-reinforced plastic composites.
ISO 14130
ShearApparent interlaminar shear strength by short-beam method.
ISO 527-4 / -5
TensileTensile properties of isotropic/orthotropic and unidirectional fibre-reinforced plastic composites.
Showing 1–8 of 28 standards
Next
Tell us the specimen, not just the standard.
Thickness, width and expected break force decide the grip as much as the method does. Send us those and we will specify the frame, the load cell and the fixture around them.