API 1104
Flexure & bendStructural and pipeline welding codes — mechanical acceptance testing of weld coupons.
Flexure & bend
Flexural Testing Machine
The specimen is supported near its ends and loaded in the middle — three-point or four-point bend — giving flexural strength, flexural modulus and deflection at break.
ASME BPVC Section IX
Flexure & bendWelder and weld procedure qualification — transverse tension and guided bend tests for pressure vessels and piping.
ASTM A615
Flexure & bendTMT rebar — proof stress, elongation, bend and rebend for site and mill certification.
ASTM A615 / A706
Flexure & bendDeformed and plain carbon-steel / low-alloy steel rebar — mechanical property verification.
ASTM C1161
Flexure & bendFlexural strength of advanced ceramics at ambient temperature.
ASTM C1499
Flexure & bendEquibiaxial flexural strength of advanced ceramics (ring-on-ring) — also applied to glass discs.
ASTM C158
Flexure & bendFlexure testing of glass (determination of modulus of rupture).
ASTM C297 / C393 / C365
Flexure & bendHoneycomb sandwich panels — flatwise tension, beam flexure and core compression.
ASTM C39 / C78
Flexure & bendConcrete cubes, cylinders and beams — compressive and flexural strength.
ASTM C393 / D7249
Flexure & bendCore shear and facing properties of sandwich constructions by beam flexure.
ASTM C78 / C293
Flexure & bendFlexural strength of concrete beams (third-point and centre-point loading).
ASTM D198
Flexure & bendStatic tests of lumber in structural sizes.
ASTM D6272
Flexure & bendFlexural properties of plastics by 4-point bending.
ASTM D638 / D790
Flexure & bendInterior and exterior plastic trims, bumpers — tensile and flexural properties.
ASTM D790
Flexure & bendFlexural properties (3-point bending) of unreinforced and reinforced plastics.
ASTM D790 / D7264
Flexure & bendFlexural properties of composites — 3-point and 4-point bending.
ASTM E190
Flexure & bendGuided bend test for ductility of welds.
ASTM E290
Flexure & bendBend testing of materials for ductility (guided, semi-guided and free bend).
ASTM F2502
Flexure & bendBioabsorbable plates and screws — static bending and torsion characterization.
ASTM F2606
Flexure & bendThree-point bending of balloon-expandable vascular stents and stent systems.
AWS D1.1
Flexure & bendStructural and pipeline welding codes — mechanical acceptance testing of weld coupons.
EN 12390-3 / -5
Flexure & bendTesting hardened concrete (European suite) — compressive and flexural strength of specimens.
EN 1288-3
Flexure & bendGlass in building — bending strength by four-point bending of flat glass.
EN 13230-2 / -3
Flexure & bendEuropean concrete sleeper and bearer testing — static and dynamic bending of monoblock sleepers.
EN 310
Flexure & bendWood-based panels — modulus of elasticity in bending and bending strength.
IRS T-39 / RDSO
Flexure & bendPre-tensioned PSC sleepers — static bending: moment of resistance at rail-seat bottom and centre top, and failure moment (large-frame flexure).
IS 15658
Flexure & bendPrecast concrete paver blocks — strength requirements.
IS 1599
Flexure & bendIndian Standard bend test for metallic materials. Equivalent to: ISO 7438
IS 1786
Flexure & bendHigh-strength deformed steel bars (rebar) for concrete reinforcement — 0.2% proof stress, elongation, bend and rebend tests. Equivalent to: —
IS 516
Flexure & bendIndian Standard — compressive and flexural strength of hardened concrete (cubes, beams).
ISO 10545-4
Flexure & bendCeramic tiles — modulus of rupture and breaking strength (3-point bend).
ISO 1288-3
Flexure & bendGlass in building — bending strength by four-point bending of flat glass.
ISO 14125
Flexure & bendFlexural properties of fibre-reinforced plastic composites.
ISO 15630-1
Flexure & bendTest methods for reinforcing steel bars, rods and wire.
ISO 15841
Flexure & bendOrthodontic wires — three-point bend and tensile characterization.
ISO 178
Flexure & bendDetermination of flexural properties of plastics (3-point bend).
ISO 20795-1
Flexure & bendDenture base polymers — flexural strength and modulus.
ISO 4049
Flexure & bendPolymer-based restorative materials (dental composites) — three-point flexural strength (2×2×25 mm bars).
ISO 5173
Flexure & bendBend tests on welds in metallic materials (root, face and side bend).
ISO 6603
Flexure & bendInterior and exterior plastic trims, bumpers — tensile and flexural properties.
ISO 6872
Flexure & bendDental ceramics — flexural strength (3-point, 4-point and biaxial piston-on-three-balls).
ISO 7438
Flexure & bendBend test of metallic materials. Equivalent to: IS 1599
Showing 1–8 of 42 standards
Next
Tell us the specimen, not just the standard.
Thickness, width and expected break force decide the grip as much as the method does. Send us those and we will specify the frame, the load cell and the fixture around them.