ASTM C633
Peel & adhesionAdhesion or cohesion strength of thermal spray coatings (tension pull-off).
Adhesives, tapes & bonded joints
Adhesive Testing Machine
Filter by test type, industry or standards body, or search a designation directly. Where a method has an equivalent under another body, both are shown.
Runs onSeries 7200
ASTM C794
Peel & adhesionAdhesion-in-peel of elastomeric joint sealants (construction sealants).
ASTM D1002
ShearApparent shear strength of single-lap-joint adhesively bonded metal specimens.
ASTM D1781
Peel & adhesionClimbing drum peel for adhesives — sandwich facings and laminated assemblies (aerospace).
ASTM D1876
Peel & adhesionT-peel resistance of adhesives (flexible-to-flexible adherends).
ASTM D2919
Creep & relaxationDurability of adhesive lap-shear joints under sustained static load.
ASTM D3163 / D5868
ShearLap-shear strength of adhesively bonded plastic and FRP joints.
ASTM D3167
Peel & adhesionFloating roller peel resistance of adhesives (metal-to-metal bonds).
ASTM D3330
Peel & adhesionPeel adhesion of pressure-sensitive tape (180°, 90° and adhesion-to-liner methods).
ASTM D4541
Peel & adhesionPull-off strength of coatings (adhesion testers; also performed on UTM with suitable fixtures).
ASTM D6862
Peel & adhesion90° peel resistance of adhesives.
ASTM D897 / D2095
TensileTensile (butt-joint) strength of adhesive bonds — bar and rod specimens.
ASTM D903
Peel & adhesionPeel or stripping strength of adhesive bonds (180° peel).
ASTM D905
ShearStrength of adhesive bonds in shear by compression loading (wood block shear).
ASTM F2256
Peel & adhesionStrength of tissue adhesives in T-peel by tension loading (medical).
ASTM F2458
TensileWound closure strength of tissue adhesives and sealants.
EN 1348
Peel & adhesionAdhesives for tiles — tensile adhesion (pull-off) strength of cementitious adhesives.
ISO 10365
TensileDesignation of main adhesive bond failure patterns — reporting companion to all bond tests.
ISO 11339
Peel & adhesionT-peel test for flexible-to-flexible bonded assemblies.
ISO 4587
ShearTensile lap-shear strength of rigid-to-rigid bonded assemblies.
ISO 8339
TensileBuilding sealants — tensile properties at maintained extension.
ISO 8510-1 / -2
Peel & adhesion90° and 180° peel test for flexible-bonded-to-rigid assemblies.
Showing 1–8 of 22 standards
Next
Tell us the specimen, not just the standard.
Thickness, width and expected break force decide the grip as much as the method does. Send us those and we will specify the frame, the load cell and the fixture around them.