Dak offers a full line of grips and fixtures for materials and product testing. The gripping system is a critical and integral part of a successful test and credible repeatable test data. The process of setting up a test should be fast and easy to achieve, the specimen must be held firmly and consistently for every test, and the system should be safe and reliable. If the specimen is not gripped properly or adequately, the test data will not be reliable.
Eccentric Roller Grips -TJ 10
These are general purpose, self-tightening grips for dumb-bell and flat samples upto 25mm wide and 5mm thick.
Wide Eccentric Roller Grips – TJ 22
These are a 50 mm wide version of the TJ 10 grips, The Eccentric Roller grip is a general purpose self-tightening grip for
Universal Parallel Wedge Grips -TJ15
These are general purpose sliding wedge, self-tightening grips for heavier loads. Standard faces for flat specimens up to 25 mm wide.
Wide Vice Action Grips- TJ26
These grips employ a vice action. They are supplied with interchangeable flat and corrugated jaw faces.
Square Vice Action Grip- TJ34
These grips employ an easy to operate vice action. The flat 25 mm square, rubber-coated jaw faces have a
Motorized Ring Grip- TJ101
Ring grip for testing O ring type rubber samples. The lower bollard is driven by motor.The upper bollard is free to rotate.
Penumatic Grips – HJ 42
Pneumatically operated vice action grips.Standard jaw faces 25 mm square flat metal Optional
Heavy Duty Pneumatic Grips- HJ 44
Pneumatically operated vice action grips.Standard jaw faces 50 mm square flat metal.Optional faces
Yarn/ Chord Grips- HJ 43
Dak¡¯s Pneumatic yarn Grips are ¡°horn¡± styled grips designed to reduce stress concentration on specimens